To operate a filtration system for the pool , if the new pool is being handed over to put to use the pool of providers you were instructions on how to manage , operate and use . But for some pool not care and just use the regular operation of the system before the filter , you should pay attention to the following points :

1 . For sand filter system :

– Check the system controller : Switches total anti- shock , grounding wires , switches and automatic work mode .

– Check wiring for pumps

– Check that the pump shaft is not locked .

– Check the amount of trash pumps .

– Check the valve was closed not open by processes (including valves for suction mode – exhaust filter control valve . )

* NOTE: Before running operation mode filter , the filter should contact discharge by a long sand filters do not use dirty residue affects the filtering capacity , water quality loc . How to Tell sand filter in the filter is clean or not by looking at the water in the pipe visits polygonal filter valve .

When the operation mode filter should check the pressure gauge on the filter .

2 . For filtration system piping :

– Check the system controller : Switches total anti- shock , grounding wires , switches and automatic work mode .

– Check wiring for pumps .

– Check the box of the pump techniques .

– Check that the pump shaft locked or not .

– Check valves , couplings Zaco .

– Before cleaning filter bags should operate .

For filter pump , so 01 -year periodic maintenance / time , particularly for long filter pump is not to be used for maintenance prior to the operation to ensure the safety of the device and the user , and maintain the life of the machine according to manufacturer standards .

Corporation Construction Management Consultant CMC besides design and construction of villas , senior housing , we also provide maintenance services , home maintenance and care of trees … customers in need of maintenance, pool maintenance , please contact our CMC consultant to be served .

according to CMC